Skip to content

TONE GPTN-331E Turn-of-Nut Wrench

The GPTN-331E turn-of-nut wrench features an integrated reverse kit, overload protection, clockwise and counterclockwise torque control, setting dial, LED indicator lights, and a maximum torque of 2,200 ft-lb. Our line of turn-of-nut wrenches are designed for the turn-of-nut method and automatically tightens the bolt assembly to the preset rotation.

Fully Tensioned Structural Bolts:

A325 – 1”, 1-1/8″, 1-1/4″

A325M – M24, M27, M30

A490 – 1″, 1-1/8″, 1-1/4″

A490M – M24, M27, M30

 Maximum Torque:

2,200 ft–lb. (2,980 N-m)

 

Talk to a Specialist
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est

Specifications

Model TONE GPTN-331E
Voltage 110-120 V
Maximum Current 15.5 A
Maximum Power  1,750 W
Frequency 50-60 Hz
Maximum Torque 2,200 ft–lb. (2,980 N-m)
Controllable Angle Range 90-240°
No-load Speed 5 rpm
Tool Weight 19.4 lb. (8.8 kg)
Repeated Accuracy ±10°
Angle Range 90~240°

Available Accessories

Inch Sockets Metric Sockets
Nut Dimension Across Flats Heavy-Hex Bolt Diameter Nut Dimension Across Flats Heavy-Hex Bolt Diameter Finished Hex Bolt Diameter
1 – 5/8″ 1″ 41 mm M24 M27
1 – 13/16″ 1 – 1/8″ 46 mm M27 M30
2″ 1 – 1/4″ 50 mm M30 M33

Documents

Helpful resources:

Dimensioned Drawing

Instructional Manual

Turn-of-Nut Catalog

Trusted by:

Testimonials

Kind words from our customers:

  • “GWY has been a great company to work with. My company requires receipts for all credit card purchases and GWY has made this very easy. With rental equipment this usually isn't the easiest to deal with but they have made this process very smooth. I get a weekly receipt emailed to me without having to ask for it. They also have great customer service and are very helpful and friendly. Would definitely recommend.”

    Jeremy
    Faith Technologies, Inc.

  • “GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”

    Ron
    GEM Inc.

FAQs

Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?

No, because for the tool to start counting the degrees of rotation, a certain torque must be met.

Does my TN wrench need to be calibrated?

No, turn of nut (TN) wrenches do not require calibration. TN tools are rotation tools, and they measure rotation mechanically. These tools either work or they do not. You can match mark to show they are functioning properly.

Are the same size sockets interchangeable between different tools?

Typically, the answer is no but there are exceptions.  The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ. There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ. The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.