Skip to content

TONE GPTN-451E Turn-of-Nut Wrench

The GPTN-451E turn-of-nut wrench features an integrated reverse kit, overload protection, clockwise and counterclockwise torque control, a setting dial with controllable angle range, LED indicator lights, and a maximum torque of 5,160 ft-lb. Our line of turn-of-nut wrenches are designed for the turn-of-nut method and automatically tightens the bolt assembly to the preset rotation.

Fully Tensioned Structural Bolts:

A325 – 1-3/8″, 1-1/2″

A325M – M33

A490 – 1-3/8″, 1-1/2″

A490M – M33

Maximum Torque:

5,160 ft–lb. (7,000 N-m)

Talk to a Specialist
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est


Model TONE GPTN-451E
Voltage 110-120 V
Maximum Current 14.5 A
Maximum Power  1,650 W
Frequency 50-60 Hz
Maximum Torque  5,160 ft–lb. (7,000 N-m)
Controllable Angle Range 90-240°
No-load Speed 2.0 rpm
Tool Weight 28.9 lb. (13.1 kg)
Repeated Accuracy ±10°

Available Accessories 

Inch Sockets Metric Sockets
Nut Dimension Across Flats Heavy-Hex Bolt Diameter Nut Dimension Across Flats Heavy-Hex Bolt Diameter Finished Hex Bolt Diameter
2 – 3/16″ 1 – 3/8″ 55 mm M33 M36
2 – 3/8″ 1 – 1/2″

Bar Sockets


Helpful resources:

Instructional Manual

Trusted by:


Kind words from our customers:

  • It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”

  • I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”

  • From choosing the right equipment for each job’s unique requirements to problem solving in the field, GWY is always willing to go out of the way to find a solution. Mix that customer service in with their technical expertise and easy-to-use tools, they really help make bolt up easy.”

  • GWY has been a great company to work with. My company requires receipts for all credit card purchases and GWY has made this very easy. With rental equipment this usually isn't the easiest to deal with but they have made this process very smooth. I get a weekly receipt emailed to me without having to ask for it. They also have great customer service and are very helpful and friendly. Would definitely recommend.”

  • GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”


Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?

No, because for the tool to start counting the degrees of rotation, a certain torque must be met.

Does my TN wrench need to be calibrated?

No, turn of nut (TN) wrenches do not require calibration. TN tools are rotation tools, and they measure rotation mechanically. These tools either work or they do not. You can match mark to show they are functioning properly.

Are the same size sockets interchangeable between different tools?

Typically, the answer is no but there are exceptions.  The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ. There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ. The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.