Skip to content

TONE GPTN-241E Turn-of-Nut Wrench

The GPTN-241E turn-of-nut wrench features an integrated reverse kit, overload protection, clockwise and counterclockwise torque control, setting dial, LED indicator lights, and a maximum torque of 900 ft-lb. Our line of turn-of-nut wrenches are designed for the turn-of-nut method and automatically tightens the bolt assembly to the preset rotation.

Fully Tensioned Structural Bolts:

A325 – 3/4″, 7/8”
A325M – M20, M22
A490 – 3/4”, 7/8″
A490M – M20, M22

 Maximum Torque:

900 ft–lb. (1,220 N-m)
Talk to a Specialist
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est

Specifications

Model TONE GPTN-241E
Voltage 110-120 V
Maximum Current 18 A
Maximum Power  1,900 W
Frequency 50-60 Hz
Maximum Torque 900 ft–lb. (1,220 N-m)
Angle Range 90-240°
No-load Speed 16 rpm
Weight 16.1 lb. (7.3 kg)
Repeated Accuracy ±10°

Available Accessories

Inch Sockets Metric Sockets
Nut Dimension Across Flats Heavy-Hex Bolt Diameter Nut Dimension Across Flats Heavy-Hex Bolt Diameter Finished Hex Bolt Diameter
1 – 1/4″ 3/4″ 32 mm M20 M22
1 – 7/16″ 7/8″ 36 mm M22 M24
1 – 5/8″* 1″* 41 mm* M24* M27*

*Not for normal use with these diameter bolts, lubrication is required

Documents

Helpful resources:

Dimensioned Drawing

Instructional Manual

Turn-of-Nut Catalog

Trusted by:

Testimonials

Kind words from our customers:

  • “I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”

    David
    Ogeechee Steel

  • “From choosing the right equipment for each job’s unique requirements to problem solving in the field, GWY is always willing to go out of the way to find a solution. Mix that customer service in with their technical expertise and easy-to-use tools, they really help make bolt up easy.”

    Jake
    South Capital Bridgebuilders

FAQs

Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?

No, because for the tool to start counting the degrees of rotation, a certain torque must be met.

Does my TN wrench need to be calibrated?

No, turn of nut (TN) wrenches do not require calibration. TN tools are rotation tools, and they measure rotation mechanically. These tools either work or they do not. You can match mark to show they are functioning properly.

Are the same size sockets interchangeable between different tools?

Typically, the answer is no but there are exceptions.  The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ. There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ. The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.