TONE S-80EZA Minimal Clearance Shear Wrench
The S-80EZA minimal clearance shear wrench model is compact and fits into those difficult to reach areas.
| Fully Tensioned Structural Bolts | Maximum Torque |
| A325 – 3/4″, 7/8″, 1″ | 595 ft-lb. (804 N-m) |
| A325M – M20, M22, M24 | |
| A490 – 3/4″, 7/8″ | |
| A490M – M20, M22 |
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
Specifications
| Model | TONE S-80EZA |
| Voltage | 115 V |
| Maximum Current | 11.5 A |
| Rated Power | 1,100 W |
| Frequency | 50-60 Hz |
| Maximum Torque | 595 ft-lb. |
| No-load Speed | 12 rpm |
| Weight | 17.4 lb. |
TONE S-80EZA Minimal Clearance TC Bolt Wrench Parts
| Part # | Description | QTY/Unit |
| 1 | SPIROLOX FRR-75 | 2 |
| 2 | SOCKET ASS’Y | 1 |
| 2-A | OUTER SOCKET | 1 |
| 2-B | INNER SOCKET | 1 |
| 3 | EJECTOR PIN | 1 |
| 4 | EJECTOR SPRING | 1 |
| 5 | INNER SOCKET SPRING | 1 |
| 6 | STEPPED BUSH 53X74.8X5 | 1 |
| 7 | INNER SOCKET HOLDER ASS’Y | 1 |
| 8 | 3RD GEAR PIN | 4 |
| 9 | 3RD IDLE GEAR | 4 |
| 10 | NEEDLE CAGE KT101412 | 8 |
| 11 | 3RD CAGE | 1 |
| 12 | STEPPED BUSH 12X23.7X9 | 1 |
| 13 | STEEL BALL 7/32″” | 39 |
| 14 | BUSH 65X74.5X5 | 1 |
| 15 | BUSH 29X54X3 | 1 |
| 16 | 3RD PINION GEAR | 1 |
| 17 | 2ND IDLE GEAR ASS’Y | 1 |
| 18 | NEEDLE CAGE KT121610 | 4 |
| 19 | 2ND IDLE GEAR | 4 |
| 20 | 2ND CAGE | 1 |
| 21 | 2ND GEAR PIN | 4 |
| 22 | BUSH 26X54X3 | 1 |
| 23 | 2ND PINION GEAR | 1 |
| 24 | 1ST IDLE GEAR ASS’Y | 1 |
| 25 | 1ST GEAR PIN | 4 |
| 26 | 1ST IDLE GEAR | 4 |
| 27 | METAL SLEEVE 688 (4PCS + 3PCS) | 7 |
| 28 | 1ST CAGE | 1 |
| 29 | INTERNAL GEAR | 1 |
| 30 | METAL SLEEVE NTB3047 | 1 |
| 31 | FRICTION DISK | 1 |
| 32 | METAL SLEEVE 6903 | 1 |
| 33 | SPIRO WASHER | 1 |
| 34 | SPIROLOX FRR-68 | 1 |
| 35 | HOUSING | 1 |
| 36 | HSH BOLT M5X8 | 6 |
| 37 | 1ST PINION GEAR | 1 |
| 38 | METAL SLEEVE 6807 | 1 |
| 39 | LATCH COVER | 1 |
| 40 | LATCH | 1 |
| 41 | LATCH SPRING | 1 |
| 42 | HOUSING COVER | 1 |
| 43 | CRFH SCREW M5X10 | 4 |
| 44 | HSH BOLT M5X20 | 6 |
| 45 | LATCH BAR | 1 |
| 46 | LATCH BAR COVER | 1 |
| 47 | CRFH SCREW M4X10 | 4 |
| 48 | IDLE GEAR | 1 |
| 49 | KEY 2X2X7 | 1 |
| 50 | RETAINING RING C-TYPE ISTW-8 | 2 |
| 51 | SPIRAL MITER R | 1 |
| 52 | IDLE GEAR | 1 |
| 53 | METAL SLEEVE W688Z | 1 |
| 54 | HEX NUT M5 | 4 |
| 55 | SPRING WASHER M5 | 4 |
| 56 | STUD BOLT M5X28 | 4 |
| 57 | CIRCLIP IKO WR10 | 1 |
| 58 | SPIRAL MITER L | 1 |
| 59 | KEY 3X3X8 | 1 |
| 60 | SWING LEVER | 1 |
| 61 | CONNECTING SPRING | 1 |
| 62 | WIRE ROPE | 1 |
| 63 | SWING LEVER BOLT M4X25 | 1 |
| 64 | INSULATING TUBE A | 1 |
| 65 | INSULATING TUBE B | 1 |
| 66A | MOTOR ASS’Y 115V | 1 |
| 66B | MOTOR ASS’Y 220V | 1 |
| 67 | NEEDLE CAGE HK1312 | 1 |
| 68 | METAL SLEEVE BRACKET B | 1 |
| 69 | INPUT SHAFT | 1 |
| 70 | KEY 4X4X8 | 1 |
| 71 | HELICAL GEAR | 1 |
| 72 | RETAINING RINGS C-TYPE DIA 11 | 1 |
| 73 | METAL SLEEVE 608 | 1 |
| 74 | CRPH SCREW M4X6 W/H WASHER | 2 |
| 75 | PLATE A | 1 |
| 76 | METAL SLEEVE BRACKET A | 1 |
| 77 | CRPH SCREW M5X15 W/H WASHER | 3 |
| 78 | HSH BOLT M5X30 | 3 |
| 79 | PIN | 1 |
| 80 | METAL SLEEVE 629ZZ | 1 |
| 81A | ARMATURE 115V | 1 |
| 81B | ARMATURE 220V | 1 |
| 82 | CRPH SCREW M4X60 W/H WASHER | 2 |
| 83 | PLATE B | 1 |
| 84 | METAL SLEEVE 627ZZ | 1 |
| 85A | STATOR 115V | 1 |
| 85B | STATOR 220V | 1 |
| 86 | INSULATING WASHER | 2 |
| 87 | STATOR SPIDER ASS’Y | 1 |
| 88 | BRUSH CAP | 2 |
| 89 | CARBON BRUSH | 2 |
| 90 | RUBBER PLUG | 1 |
| 91 | RIVET 0X4.8MM | 4 |
| 92A | RATING PLATE 115V | 1 |
| 92B | RATING PLATE 220V | 1 |
| 93 | WARNING LABEL | 1 |
| 94 | GRIP | 1 |
| 95 | CRPH SCREW M4X35 | 4 |
| 96 | SPRING PIN 4X18 | 2 |
| 97 | CAM | 1 |
| 200 | TRIGGER SWITCH F-20-5A | 1 |
| 99 | CRPH SCREW M4X6 W/H WASHER | 2 |
| 102 | INSULATED CONNECTOR 5.5-SD | 1 |
| 103 | CORD CLAMP | 2 |
| 104 | TEETH WASHER M4 | 2 |
| 105 | CRPH SCREW M4X14 | 2 |
| 106 | CORD ARMOUR | 1 |
| 107 | CORD ARMOUR WASHER | 1 |
| 108 | GRIP COVER | 1 |
| 109 | CRFH SCREW M4X25 | 1 |
| 110 | EJECTOR LEVER | 1 |
| 111 | CONDENSER PAB 104 | 1 |
| 113A | CORD ASS’Y 115V | 1 |
| 113B | CORD ASS’Y 220V | 1 |
| 114 | PLUG 220V | 1 |
| 115 | SIDE GRIP | 1 |
| 116 | SCREW DRIVER | 1 |
| 117 | METAL CASE | 1 |
| 119 | CONNECTOR 220V | 1 |
Parts not listed are part of an assembly and are not available separately.
Need parts for this product? Fill out our form, and we can help you out. Request parts HERE
Documents
Helpful resources:
Instructional Manual
Parts Diagram
Testimonials
Kind words from our customers:
-
“GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”
-
“It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”
FAQs
Will this tool fit where I need it to?
We can email a dimensioned drawing, or one is available on our website for reference.
What is the lead time on getting this tool to me?
If we have it in stock, we can send it next day air within the US to get to you tomorrow.
Is there a warranty on your tools?
1-year manufacturers defect warranty on new tools.
