TONE S-90EZ Electric Shear Wrench
The S-90EZ shear wrench is a discontinued model that is versatile and compatible with a wide range of bolt diameters. A comparable model to the S-90EZ is the GS-91EZ.
| Fully Tensioned Structural Bolts | Maximum Torque |
| A325 – 5/8″, 3/4″, 7/8″, 1″ | 595 ft-lb. (804 N-m) |
| A325M – M16, M20, M22 | |
| A490 – 5/8″, 3/4″, 7/8″ | |
| A490M – M16, M20, M22 |
Specifications
| Model | TONE S-90EZ |
| Voltage | 115 V |
| Maximum Current | 12 A |
| Rated Power | 1,200 W |
| Frequency | 50-60 Hz |
| Maximum Torque | 595 ft-lb. |
| No-load Speed | 15 rpm |
| Weight | 16.5 lb. |
TONE S-90EZ TC Bolt Wrench Parts
| Part # | Description | Qty |
| 1-A | OUTER SOCKET | 1 |
| 1-B | INNER SOCKET | 1 |
| 2 | EJECTOR PIN | 1 |
| 3 | EJECTOR SPRING | 1 |
| 4 | INNER SOCKET SPRING | 1 |
| 5 | SPIROLOX | 1 |
| 6 | SPIRO STOPPER | 1 |
| 7 | SPIROLOX | 1 |
| 8 | SET SCREW | 2 |
| 9 | OUTER SOCKET HOLDER | 1 |
| 10 | BUSH | 1 |
| 11 | INNER SOCKET HOLDER ASS’Y | 1 |
| 12 | HSH REAMER BOLT | 3 |
| 13 | 3RD SPIDER ASS’Y | 1 |
| 14 | STEEL BALL | 34 |
| 15 | INTERNAL GEAR | 1 |
| 16 | BUSH | 1 |
| 17 | 3RD GEAR PIN | 3 |
| 18 | 3RD PINION GEAR | 1 |
| 19 | GEAR CASE | 1 |
| 20 | 3RD IDLE GEAR | 3 |
| 21 | NEEDLE CAGE | 6 |
| 22 | STEPPED BUSH | 1 |
| 23 | 2ND IDLE GEAR ASS’Y | 1 |
| 24 | 2ND GEAR PIN | 3 |
| 25 | 2ND CAGE | 1 |
| 26 | NEEDLE CAGE | 3 |
| 27 | 2ND IDLE GEAR | 3 |
| 28 | 2ND PINION GEAR | 1 |
| 29 | BUSH | 1 |
| 30 | 1ST IDLE GEAR ASS’Y | 1 |
| 31 | 1ST GEAR PIN | 3 |
| 32 | 1ST CAGE | 1 |
| 33 | BEARING | 3 |
| 34 | 1ST IDLE GEAR | 3 |
| 35 | FRICTION DISK | 1 |
| 36 | SPIROLOX | 1 |
| 37 | SPIRO WASHER | 1 |
| 38 | BEARING | 1 |
| 39 | THRUST WASHER | 1 |
| 40 | FLANGE | 1 |
| 41 | HSH BOLT M4X10 | 6 |
| 42 | 1ST PINION GEAR | 1 |
| 43 | WOODRUFF KEY | 3 |
| 44 | BUSH | 1 |
| 45 | BEARING | 3 |
| 46 | BEVEL GEAR | 1 |
| 47 | RETAINING RING C-TYPE | 2 |
| 48 | HOUSING | 1 |
| 49 | HSH BOLT M5X25 | 4 |
| 50 | EJECTOR BRACKET | 1 |
| 51 | LATCH | 1 |
| 52 | LATCH GUIDE | 1 |
| 53 | LATCH SPRING | 1 |
| 54 | CRPH SCREW M4X20 | 2 |
| 55 | HSH BOLT M5X22 | 2 |
| 56 | PINION BEVEL GEAR | 1 |
| 57 | RETAINING RING C-TYPE | 1 |
| 58 | MOTOR GEAR | 1 |
| 59 | RETAINING RING C-TYPE | 1 |
| 60 | MOTOR PINION | 1 |
| 61 | HSH BOLT M5X16 | 6 |
| 62A | MOTOR ASS’Y 115V | 1 |
| 62B | MOTOR ASS’Y 220V | 1 |
| 63A | BEARING BRACKET ASS’Y 115V | 1 |
| 63B | BEARING BRACKET ASS’Y 220V | 1 |
| 64 | BEARING | 1 |
| 65A | ARMATURE 115V | 1 |
| 65B | ARMATURE 220V | 1 |
| 66 | BEARING | 1 |
| 67A | STATOR 115V | 1 |
| 67B | STATOR 220V | 1 |
| 68 | CRPH SCREW M5X55 W/ WASHER | 2 |
| 69 | INSULATING WASHER | 2 |
| 70A | STATOR SPIDER ASS’Y 115V | 1 |
| 70B | STATOR SPIDER ASS’Y 220V | 1 |
| 71 | BRUSH CAP | 2 |
| 72 | CARBON BRUSH | 2 |
| 73 | HSH BOLT M5X25 W/ WASHER | 4 |
| 74 | WARNING LABEL | 1 |
| 75 | RIVET | 4 |
| 76A | RATING PLATE 115V | 1 |
| 76B | RATING PLATE 220V | 1 |
| 77 | CUSHION RUBBER | 1 |
| 78 | WASHER | 1 |
| 79 | CRPH SCREW M5X10 | 2 |
| 80 | GRIP WITH SPRING PIN | 1 |
| 81 | EJECTOR LEVER | 1 |
| 82 | CRPH SCREW M3.5X6 W/ WASHER | 1 |
| 83 | CRPH SCREW M4X6 W/ WASHER | 5 |
| 84 | INSULATED CONNECTOR | 1 |
| 85 | CORD CLAMP | 2 |
| 86 | WASHER M4 | 2 |
| 87 | CRPH SCREW M4X14 | 2 |
| 88 | CORD ARMOUR | 1 |
| 89 | CORD ARMOUR WASHER | 1 |
| 90 | CRFH SCREW M4X30 | 2 |
| 91 | GRIP COVER | 1 |
| 92 | CONDENSER | 1 |
| 93 | INSULATED TERMINAL | 2 |
| 94A | CORD ASS’Y 115V | 1 |
| 94B | CORD ASS’Y 220V | 1 |
| 97 | METAL CASE | 1 |
| 200 | TRIGGER SWITCH KIT | 1 |
Parts not listed are part of an assembly and are not available separately.
Need parts for this product? Fill out our form, and we can help you out. Request parts HERE
Documents
Helpful resources:
Dimensioned Drawings
Instructional Manual
Parts Diagram
Testimonials
Kind words from our customers:
-
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
-
“GWY has been a great company to work with. My company requires receipts for all credit card purchases and GWY has made this very easy. With rental equipment this usually isn't the easiest to deal with but they have made this process very smooth. I get a weekly receipt emailed to me without having to ask for it. They also have great customer service and are very helpful and friendly. Would definitely recommend.”
