TONE TN-24EZ Turn-of-Nut Wrench
The TN-24EZ turn-of-nut wrench features a setting dial with controllable angle range, LED indicator lights, and a maximum torque of 921 ft-lb. A comparable item to the TN-24EZ is the TN-24EZA.
| Fully Tensioned Structural Bolts | Maximum Torque |
| A325 – 3/4″, 7/8″, 1″ | 921 ft-lb. (1250 N-m) |
| A325M – M20, M22 | |
| A490 – 3/4″, 7/8″ | |
| A490M – M20, M22 |
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
Specifications
| Model | TONE TN-24EZ |
| Voltage | 115 V |
| Maximum Current | 13.5 A |
| Rated Power | 1,100 W |
| Frequency | 50-60 Hz |
| Maximum Torque | 921 ft-lb. |
| No-load Speed | 9 rpm |
| Weight | 15.4 lb. |
TONE TN-24EZ Turn-of-Nut Wrench Parts
| Part # | Description | Qty |
| 1 | BAR SOCKET | 1 |
| 2 | BAR SKT WARNING LABEL | 1 |
| 3 | SPIROLOX | 1 |
| 4 | SPIRO STOPPER | 1 |
| 5 | SUB SPIRO STOPPER | 1 |
| 6 | SPIROLOX | 2 |
| 7 | SET SCREW | 2 |
| 8 | OUTER SOCKET HOLDER | 1 |
| 9 | INNER SOCKET HOLDER ASS’Y | 1 |
| 10 | BUSH | 1 |
| 11 | 3RD IDLE GEAR ASS’Y | 1 |
| 12 | 3RD CAGE | 1 |
| 13 | 3RD IDLE GEAR | 4 |
| 14 | NEEDLE CAGE | 8 |
| 15 | 3RD GEAR PIN | 4 |
| 16 | STEEL BALL | 39 |
| 17 | BUSH | 1 |
| 18 | INTERNAL GEAR | 1 |
| 19 | 3RD PINION GEAR | 1 |
| 20 | BUSH | 1 |
| 21 | 2ND IDLE GEAR ASS’Y | 1 |
| 22 | 2ND CAGE | 1 |
| 23 | 2ND IDLE GEAR | 4 |
| 24 | NEEDLE CAGE | 4 |
| 25 | 2ND GEAR PIN | 4 |
| 26 | 2ND PINION GEAR | 1 |
| 27 | BUSH | 1 |
| 28 | 1ST IDLE GEAR ASS’Y | 1 |
| 29 | 1ST GEAR PIN | 3 |
| 30 | 1ST CAGE | 1 |
| 31 | NEEDLE CAGE | 3 |
| 32 | 1ST IDLE GEAR | 3 |
| 33 | BEARING | 1 |
| 34 | FRICTION DISK | 1 |
| 35 | SPIROLOX | 1 |
| 36 | SPIRO WASHER | 1 |
| 37 | BEARING | 1 |
| 38 | HOUSING | 1 |
| 39 | CRPH SCREW M4X10 | 4 |
| 40 | O-RING | 1 |
| 41 | 1ST PINION GEAR | 1 |
| 42 | NEEDLE ROLLER | 1 |
| 43 | NEEDLE ROLLER | 2 |
| 44 | PUSH SPRING | 1 |
| 45 | PUSH SLEEVE | 1 |
| 46 | BEARING | 2 |
| 47 | BEVEL GEAR PIN | 3 |
| 48 | BEVEL GEAR | 1 |
| 49 | LIMIT TORQUE SPRING | 1 |
| 50 | TORQUE ADJUSTMENT SLEEVE | 1 |
| 51 | FLAT END HSH SET SCREW M5X10 | 6 |
| 52 | BEARING | 1 |
| 53 | CIRCLIP | 1 |
| 54 | HOUSING COVER | 1 |
| 55 | HSH BOLT M4X12 | 4 |
| 56 | LIMIT LEVER | 1 |
| 57 | PINION BEVEL GEAR | 1 |
| 58 | KEY | 1 |
| 59 | BEARING | 2 |
| 60 | MOTOR GEAR | 1 |
| 61 | RETAINING RING C-TYPE | 1 |
| 62 | BEARING | 1 |
| 63 | RETAINING RING E-TYPE | 2 |
| 64 | IDLE PIN | 1 |
| 65 | MOTOR IDLE GEAR | 1 |
| 66 | SPIROLOX | 1 |
| 67 | BUSH | 1 |
| 68 | STUD BOLT | 2 |
| 69 | HSH BOLT M4X30 | 2 |
| 70 | HSH BOLT M4X20 | 2 |
| 71 | BRACKET | 1 |
| 72 | E-NUT M5 | 2 |
| 73 | HSH BOLT M5X12 | 1 |
| 74 | SPRING PIN | 1 |
| 75 | SPACER | 1 |
| 76 | LIMIT LEVER SPRING | 1 |
| 77 | BEARING | 2 |
| 78 | LIMIT LEVER HOOK | 1 |
| 79 | MOTOR ASS’Y 115V | 1 |
| 80 | RETAINING RING C-TYPE | 1 |
| 81 | BEARING | 1 |
| 82 | BEARING BRACKET | 1 |
| 83 | ARMATURE 115V | 1 |
| 84 | CRPH SCREW M4X65 W/ WASHER | 2 |
| 85 | BEARING | 1 |
| 86 | STATOR 115V | 1 |
| 87 | INSULATING WASHER | 2 |
| 88 | STATOR SPIDER 115V ASS’Y | 1 |
| 89 | CARBON BRUSH | 2 |
| 90 | BRUSH CAP | 2 |
| 91 | RUBBER PLUG | 1 |
| 92 | RATING PLATE 115V | 1 |
| 93 | WARNING LABEL | 1 |
| 94 | BRASS SPACER | 1 |
| 95 | HEIGHT ADJUSTMENT WASHER M3 | 1 |
| 96 | SHADING DISK | 1 |
| 97 | SPRING WASHER M3 | 1 |
| 98 | CRPH SCREW M3X18 | 1 |
| 99 | CUSHION RUBBER | 1 |
| 100 | PRESSER FOOT A | 1 |
| 101 | MICRO SWITCH MOUNT | 1 |
| 102 | MICRO SWITCH | 1 |
| 103 | PRESSER FOOT B | 1 |
| 104 | CRPH SCREW M2.3X12 | 2 |
| 105 | HSH BOLT M3X8 | 2 |
| 106 | TRIGGER SWITCH W/ WIRE | 1 |
| 107 | GRIP | 1 |
| 108 | HSH BOLT M5X35 | 4 |
| 109 | CRPH SCREW M4X30 | 2 |
| 110 | CONTROL BASE ASS’Y 115V | 1 |
| 111 | PLASTIC DIALS (PACK OF 3) | 1 |
| 112 | DISK PROTECTOR | 1 |
| 113 | CRPH SCREW M4X8 | 2 |
| 114 | CONNECTOR | 2 |
| 115 | CONDENSER | 1 |
| 116 | GRIP COVER | 1 |
| 117 | DIAL PLATE | 1 |
| 118 | CRPH SCREW M4X14 | 6 |
| 119 | CORD CLAMP | 1 |
| 120 | CORD ARMOUR | 1 |
| 121 | CORD ARMOUR WASHER | 1 |
| 122 | CORD ASS’Y 115V | 1 |
| 123 | 1ST PINION GEAR ASS’Y | 1 |
| 127 | METAL CASE | 1 |
| 128 | INSTRUCTION MANUAL | 1 |
Parts not listed are part of an assembly and are not available separately.
Documents
Helpful resources:
Instructional Manual
Testimonials
Kind words from our customers:
-
“From choosing the right equipment for each job’s unique requirements to problem solving in the field, GWY is always willing to go out of the way to find a solution. Mix that customer service in with their technical expertise and easy-to-use tools, they really help make bolt up easy.”
-
“GWY’s parts inventory and response is top notch. You can expect prompt, respectful, knowledgeable answers to questions and full cooperation when you need it. Truly a mark of a reputable company with a good team.”
FAQs
Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?
No, because for the tool to start counting the degrees of rotation, a certain torque must be met.
Are the same size sockets interchangeable between different tools?
Typically, the answer is no but there are exceptions. The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ.
There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ.
The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.
