Model GVC-301EZ TC Bolt Wrench Parts
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
TONE GVC-301EZ TC Bolt Wrench Parts
| Part # | Description | Qty |
|---|---|---|
| 1-A | OUTER SOCKET | 1 |
| 1-B | INNER SOCKET | 1 |
| 2 | EJECTOR PIN | 1 |
| 3 | EJECTOR SPRING | 1 |
| 4 | INNER SOCKET SPRING | 1 |
| 5 | SPIROLOX | 1 |
| 6 | SPIRO STOPPER | 1 |
| 7 | SUB SPIRO STOPPER (PACK OF 2) | 1 |
| 8 | SPIROLOX | 2 |
| 9 | SET SCREW | 2 |
| 10 | OUTER SOCKET HOLDER | 1 |
| 11 | INNER SOCKET HOLDER ASS’Y | 1 |
| 12 | BUSH | 1 |
| 14 | 4TH CAGE | 1 |
| 15 | 4TH IDLE GEAR | 5 |
| 16 | NEEDLE CAGE | 10 |
| 17 | 4TH GEAR PIN | 5 |
| 18 | STEEL BALL | 46 |
| 19 | BUSH | 1 |
| 20 | 6TH PINION GEAR | 1 |
| 21 | BUSH | 1 |
| 23 | 3RD CAGE | 1 |
| 24 | 3RD IDLE GEAR | 5 |
| 25 | NEEDLE CAGE | 5 |
| 26 | 3RD GEAR PIN | 5 |
| 27 | INTERNAL GEAR | 1 |
| 28 | 5TH PINION GEAR | 1 |
| 29 | THRUST WASHER | 2 |
| 31 | 2ND CAGE | 1 |
| 32 | 2ND IDLE GEAR | 4 |
| 33 | NEEDLE CAGE | 4 |
| 34 | 2ND GEAR PIN | 4 |
| 35 | 4TH PINION GEAR | 1 |
| 37 | 1ST GEAR PIN | 4 |
| 38 | 1ST CAGE | 1 |
| 39 | 1ST IDLE GEAR | 4 |
| 40 | BUSH | 4 |
| 41 | BEARING | 1 |
| 42 | FRICTION DISK | 1 |
| 43 | BEARING | 1 |
| 44 | SPIRO WASHER | 1 |
| 45 | SPIROLOX | 1 |
| 46 | LOGO PLATE | 2 |
| 47 | HOUSING | 1 |
| 48 | HSH BOLT M4X10 | 10 |
| 49 | 3RD PINION GEAR | 1 |
| 50 | BEARING | 1 |
| 51 | LATCH GUIDE | 1 |
| 52 | LATCH | 1 |
| 53 | LATCH SPRING | 1 |
| 54 | HOUSING COVER | 1 |
| 55 | CRFH SCREW M4X6 | 1 |
| 56 | LATCH COVER | 1 |
| 57 | BEARING | 2 |
| 58 | 2ND PINION GEAR | 1 |
| 59 | BUSH | 2 |
| 60 | GEAR PIN | 1 |
| 61 | BEARING | 3 |
| 62 | 1ST PINION GEAR | 1 |
| 63 | CRFH SCREW M4X10 | 2 |
| 64 | LATCH BAR | 1 |
| 65 | KEY | 1 |
| 66 | LATCH EXTENSION BAR | 1 |
| 67 | BRACKET | 1 |
| 68 | PINION BEVEL GEAR | 1 |
| 69 | BEARING | 1 |
| 70 | RETAINING RING C-TYPE | 1 |
| 71 | HELICAL GEAR | 1 |
| 72A | MOTOR ASS’Y 115V | 1 |
| 72B | MOTOR ASS’Y 220V | 1 |
| 73 | BEARING BRACKET ASS’Y | 1 |
| 74 | BEARING | 1 |
| 75 | FAN GUIDE | 1 |
| 76A | ARMATURE 115V | 1 |
| 76B | ARMATURE 220V | 1 |
| 77 | BEARING | 1 |
| 78A | STATOR 115V | 1 |
| 78B | STATOR 220V | 1 |
| 79 | CRPH TAPPING SCREW M4X60 | 1 |
| 80 | INSULATING WASHER | 1 |
| 81 | INSULATING SLEEVE | 1 |
| 82 | STATOR SPIDER ASS’Y | 1 |
| 83 | BRUSH CAP | 2 |
| 84 | CARBON BRUSH | 2 |
| 85 | RUBBER PLUG | 1 |
| 86 | SERIAL NUMBER PLATE | 1 |
| 87 | HSH BOLT M4X25 W/WASHER | 8 |
| 88 | KEY | 1 |
| 89A | RATING PLATE 115V – FRONT | 1 |
| 89B | RATING PLATE 115V – BACK | 1 |
| 89C | RATING PLATE 220V CE – FRONT | 1 |
| 89D | RATING PLATE 220V CE – BACK | 1 |
| 90 | HSH BOLT M4X32 | 4 |
| 91 | CUSHION RUBBER | 1 |
| 92 | GRIP | 1 |
| 93 | PIN | 3 |
| 94 | EJECTOR LEVER | 1 |
| 95 | EJECTOR CAM | 1 |
| 96 | TRIGGER SWITCH | 1 |
| 97 | INSULATED TERMINAL | 2 |
| 98 | CRPH SCREW M3.5X6 W/WASHER | 2 |
| 99 | GRIP COVER | 1 |
| 100 | CRPH TAP TIGHT 4X18 | 4 |
| 101 | LEAD WIRE BROWN | 1 |
| 102 | EUROPEAN TERMINAL | 1 |
| 103 | SWITCH LEVER | 1 |
| 104 | CORD CLAMP | 1 |
| 105 | CONDENSER | 1 |
| 106 | CORD ARMOUR | 1 |
| 107 | BUSH | 1 |
| 108A | CORD ASS’Y 115V | 1 |
| 108B | CORD ASS’Y 220V | 1 |
| 108-1 | CABLE | 1 |
| 108-2 | PLUG | 1 |
| 109 | METAL CASE | 1 |
Parts not listed are part of an assembly and are not available separately.
Need parts for this product? Fill out our form, and we can help you out. Request parts HERE
Documents
Helpful resources:
Dimensioned Drawings
Instruction Manual
Parts Diagram
Testimonials
Kind words from our customers:
-
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
-
“From choosing the right equipment for each job’s unique requirements to problem solving in the field, GWY is always willing to go out of the way to find a solution. Mix that customer service in with their technical expertise and easy-to-use tools, they really help make bolt up easy.”
FAQs
Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?
No, because for the tool to start counting the degrees of rotation, a certain torque must be met.
Are the same size sockets interchangeable between different tools?
Typically, the answer is no but there are exceptions. The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ.
There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ.
The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.
