Model S-20HA TC Bolt Wrench Parts
Want to talk to a specialist now?
(888) 838 6500
Business Hours: 8am - 5pm Est
TONE S-20HA TC Bolt Wrench Parts
Part# | Description | QTY/Unit |
1 | SOCKET ASS’Y | 1 |
1-A | OUTER SOCKET | 1 |
1-B | INNER SOCKET | 1 |
2 | INNER SOCKET SPRING | 1 |
3 | INNER SOCKET HOLDER | 1 |
4 | O-RING P46 | 1 |
5 | HSH SCREW (CCW) | 1 |
6 | STEPPED BUSH 6.1X17X8 | 1 |
7 | HSH REAMER BOLT | 4 |
8 | SPIDER | 1 |
9 | STEEL BALL 5/32″ (37PCS + 37PCS)” | 74 |
10 | SET SCREW | 2 |
11 | INTERNAL GEAR | 1 |
12 | GEAR PIN 6.5X33 | 4 |
13 | IDLE GEAR | 4 |
14 | CAGE | 1 |
15 | METAL SLEEVE TA-2210 | 1 |
16 | CLUTCH RING | 1 |
17 | NEEDLE ROLLER 2.5X9.8 | 1 |
18 | METAL SLEEVE IRT-1710-2 | 1 |
19 | RATCHET COVER | 1 |
20 | PINION GEAR | 1 |
21 | RATCHET PAWL | 1 |
22 | RATCHET SPRING | 1 |
23 | RATCHET HANDLE | 1 |
24 | HSH BOLT M4X16 SP | 2 |
25 | DOME NUT M5X0.83 | 1 |
26 | HANDLE DIA 22 (THIN) | 1 |
27 | HANDLE DIA 27 (THICK) | 1 |
28 | SHM SCREW M5X25 | 1 |
29 | METAL CASE | 1 |
30 | SCREW DRIVER | 1 |
31 | SPANNER | 1 |
32 | INSTRUCTION MANUAL | 1 |
Parts not listed are part of an assembly and are not available separately.
Need parts for this product? Fill out our form, and we can help you out. Request parts HERE
Documents
Helpful resources:
Dimensioned Drawings
Instructional Manual
Parts Diagram
Testimonials
Kind words from our customers:
-
“It was a great pleasure working with GWY. They go above and beyond to help with what we needed. Don was very quick on getting what we needed out to us to complete the job. Very proud to be a GWY customer.”
-
“I have enjoyed working with GWY. Their people know their product well. Their prompt response and delivery of the product is as good as any service Ogeechee Steel has ever had the pleasure of doing business with.”
FAQs
Because the TN-tool is rotation based, can it do smaller sizes than what it is recommended for?
No, because for the tool to start counting the degrees of rotation, a certain torque must be met.
Are the same size sockets interchangeable between different tools?
Typically, the answer is no but there are exceptions. The only interchangeable sockets for current model shear wrenches are between the GV-301ZA and the GVC-301EZ. The Older models like the S-60EZA share sockets with their newer models like the S-61EZ. The same is true for the S-90EZ and GS-91EZ as well as the S-110EZ and the GS-111EZ.
There are a few TN tools that share sockets with each other such as the TN-20EZ and the TN-22EZ as well as the TN-30EZ and the TN-33EZ.
The GNR series can share sockets with some of the TN tools. The GNR-31E, 51E, & 81E can use the TN-20EZ/22EZ bar sockets instead of impact sockets. The GNR-121E can use the bar sockets of the TN-24EZA and the GNR-211E can use the bar sockets of the TN-30EZ/33EZ. The GNR’s can also share impact sockets that have their correct drive size.