STC Series Electric Torque Control Wrenches for Hex Head Bolts

• Powerful, controllable torque
• Torque control function works in both directions
• Non-impact/constant speed
• One-sided installation
• Quiet, smooth operation
• Eliminates the need for impact wrenches
• Uses standard impact sockets
• Easy to handle
• Allows for precise "Turn of Nut" or "calibrated wrench" installation

The STC Series of torque control wrenches can be used for Snug Tightening, Calibrated Wrench, Turn of Nut and DTI installations.

For Snug Tightening or Calibrated Wrench installations, simply set the Torque Control Dial to the torque necessary to "snug" tighten or fully pretension the bolt assembly.

For DTIs, set the torque to the amount necessary to compress the washers to the required gap. The tool will stall when it reaches the preset torque.

For Turn of Nut, mark the socket for the specified angle of rotation and rotate the socket until it satisfies the specified amount of turn.

A complete stock of spare parts and accessories for all STC Wrench models are available for same day shipment.

Available Models:

• Model STC-5AE/STC-5TE
• Model STC-7AE/STC-7TE
• Model STC-11AE/STC-11TE
• Model STC-12AE/STC-12TE

Torque Multipliers

All STC wrenches have torque multipliers available to increase their capacity. Torque Multipliers allow a single STC Series wrench to install a full range of bolt sizes and grades.

Torque multipliers are easily attached to the STC wrenches. Just slide the multiplier over the square drive on the wrench.

The addition of a torque multiplier can increase the maximum torque output of the STC Series wrenches by up to 450%.